|
|
| |
|
| |
|
| Body |
Seat |
Temp |
| 200 PSI |
150 PSI |
100 C |
|
| |
|
| Construction |
3 piece design, Single piece stem (spindle) Reinforced Ball, Teflon seated, full bore |
| Design & Manufacturings STD |
As per Manufacturer's Standard |
| End Connections |
Flanged as per ANSI B 16.5 (150#) & as per BS 10(Table D/E/F)
& DIN STD. |
|
| Top |
|
- S.S. 304/316 Parts can be supplied
- Glass-filled PP/PTFE BALL on request
|
|
|
- PP (POLYPROPYLENE)
- HDPE (HIGH DENSITY POLYETHYLENE)
- ISOTACTIC PP
- PVDF (POLYVINYLIDENE FLUORIDE)
|
|
ALL DIMENSIONS ARE IN MM
-------------------------------------------------- (± 2MM) |
|
Size |
D |
D1 |
L |
T |
H |
H1 |
IN. |
MM |
1/2" |
15 |
100.0 |
13.5 |
129.0 |
12.7 |
69.0 |
131.0 |
3/4" |
20 |
101.0 |
19.0 |
142.0 |
14.0 |
75.0 |
131.0 |
1" |
25 |
121.0 |
25.0 |
158.0 |
21.0 |
92.0 |
161.0 |
1.1/2" |
40 |
138.0 |
38.0 |
182.0 |
22.0 |
111.0 |
205.0 |
2" |
50 |
165.0 |
50.0 |
210.0 |
23.0 |
122.0 |
205.0 |
2.1/2" |
65 |
182.0 |
63.5 |
234.0 |
25.0 |
140.0 |
262.0 |
3" |
80 |
200.0 |
75.0 |
255.0 |
25.0 |
148.0 |
262.0 |
4" |
100 |
226.0 |
100.0 |
297.0 |
28.0 |
170.0 |
335.0 |
6" |
150 |
303.0 |
150.0 |
425.0 |
35.0 |
236.0 |
405.0 |
|
| Top |
| No. |
Description |
Material |
Qty. |
01 |
Body |
PP / HDPE / ISOPP / PVDF |
1 |
02 |
Side Piece/ Connector |
PP / HDPE / ISOPP / PVDF |
2 |
03 |
Ball |
PP / HDPE / ISOPP / PVDF |
1 |
04 |
STEM/SPINDLE |
M.S. / S.S.PP / ISOPP/ PVDF Coated |
1 |
05 |
Seat Ring |
PTFE |
2 |
06 |
Connector Seal |
PTFE / PVC / Viton Rubber |
2 |
07 |
Stem Seal Ring |
PTFE |
1 |
08 |
Stem O-Ring |
Neoprene |
1 |
09 |
Stud.Nut & Washer |
M.S.(EN8) / S.S. |
Req. |
10 |
Nut Cap |
PP/HDPE |
Req. |
11 |
Handle |
M.S. PP Coated |
1 |
12 |
Handle Hex.Pin |
M.S.(EN8) / S.S. |
1 |
13 |
Handle Cap |
PP / HDPE |
1 |
|
| Top |
|
| |
|
| |
|
| 5/2 Internal pilot operated, Poppet type, Namur Solenoid valve |
| Type |
Pressure |
| 2.10 Bar |
0-10 Bar |
|
| Top |
|
- Double rack & pinion
- High corrosion resistance
- Pinion supported on polyacetal bearings
- Maximum working pressure 10bar
- Lubrication not required
- Life more than 1 million cycles
- Antiblow out pinion
- Can be converted to single acting by just adding springs
|
|
- Bifunctional version
- High flow rate, kv=12(lpm@1bar), Fast response time
- Minimum operating pressure required
- Suitable for air, gases water etc.
- Ideally suited for double acting actuator on ON/OFF & control duty
- Special versions may be developed on request
- Poppet Design
- Accessories for mounting the solenoid valve on the actuator are provided.
- Solenoid of any voltage rating/construction can be replaced at customer's end
- External pilot air operated available
|
|
Type |
Inlet |
Outlet |
Exhaust |
Pilot inlet |
Pilot vent |
Pilot |
| 51424 |
1 |
24 |
35 |
- |
6 |
Internal |
| 52408 |
1 |
24 |
35 |
7 |
6 |
External |
|
| Top |
|
| |
|
| |
|
| Body |
Seat |
Temp |
| 150 PSI |
100 PSI |
80 C |
|
| Top |
| Construction |
Weir type design, Soft seated, Raising stem |
| Design & Manufacturings STD |
As per Manufacturer's Standard |
| End Connections |
Flanged as per ANSI B 16.5 (150#) & as per BS 10(Table D/E/F) & DIN STD. |
|
| |
|
| Construction |
Weir type design, Soft seated, Raising stem |
| Design & Manufacturings STD |
As per Manufacturer's Standard |
| End Connections |
Flanged as per ANSI B 16.5 (150#) & as per BS 10(Table D/E/F) & DIN STD. |
|
| |
|
- S.S. 304/316 Parts can be supplied
- Teflon coated Rubber, EPDM Rubber, Viton Rubber on request
|
| |
|
- PP (POLYPROPYLENE)
- HDPE (HIGH DENSITY POLYETHYLENE)
- ISOTACTIC PP
- PVDF (POLYVINYLIDENE FLUORIDE)
|
| Top |
ALL DIMENSIONS ARE IN MM -------------------------------------------------- (± 2MM) |
Size |
D |
D1 |
L |
T |
H |
W |
IN. |
MM |
1/2" |
15 |
95.0 |
15.0 |
116.0 |
15.0 |
85.0 |
59.5 |
3/4" |
20 |
101.0 |
20.0 |
120.0 |
16.5 |
96.5 |
59.5 |
1" |
25 |
121.0 |
25.0 |
133.0 |
16.5 |
113.5 |
70.5 |
1.1/2" |
40 |
141.0 |
38.0 |
167.0 |
19.5 |
175.0 |
91.0 |
2" |
50 |
166.5 |
50.0 |
200.0 |
21.0 |
195.0 |
105.0 |
2.1/2" |
65 |
183.0 |
63.5 |
244.0 |
24.0 |
208.0 |
198.0 |
3" |
80.0 |
204.0 |
77.0 |
248.0 |
25.0 |
211.0 |
198.0 |
4" |
100 |
227.0 |
102.0 |
335.0 |
25.0 |
|
229.0 |
|
| |
| No. |
Description |
Material |
Qty |
| 1 |
Body |
PP/HDPE/ISOPP/PVDF |
1 |
| 2 |
Bonnet |
PP/HDPE/ISOPP/PVDF |
1 |
| 3 |
Diaphragm |
Neoprene/Teflon Coated |
1 |
| 4 |
STEM/SPINDLE |
M.S./S.S. |
1 |
| 5 |
Stem/Spindle Nut |
M.S./S.S. |
1 |
| 6 |
Compressor |
Glass Filled PP |
1 |
| 7 |
Pin |
M.S./S.S. |
1 |
| 8 |
Hand Wheel |
PP/HDPE/ISOPP/PVDF |
1 |
| 9 |
Nut, Bolt & Washer |
M.S.Zink Coated / S.S. |
1 |
|
| Top |
